Ready-mixed, fast-setting screed mortar

PCI Novoment® M3 plus

for fast track cement screeds

technical data sheet

features and benefits:

Can be tiled after approx. 3 days, walkable after approx. 1 day.
Ready-to-mix mortar, no on-site mixing with sand required.
Long processing time, can be worked with and smoothed for almost 1 hour despite of short curing time.
Suitable for application by pump, even at higher temperatures.
Temperature resistant from -30°C to +80°C, therefore suitable for balconies, terraces, garages, industrial floor coverings cleaned with superheated steam.
Insensitive to moisture, therefore suitable for areas exposed to permanent wetness.
Limited bending (suitability test to 6.2 DIN 18560-2), it is therefore possible to reduce layer thickness to 30 mm for screeds on insulation layer according to chart 1 (perpendicular load capacity ≤ 2 kN/m²) or chart 2 (perpendicular load capacity, area load ≤ 3 kN/m²), in case of heated screeds the pipes must be covered by a layer thickness of 30 mm.

EMICODE: EC1 PLUS

fields of application:

For indoor and outdoor use, also for direct use.
For areas which are exposed to permanent wetness.
For fast track bonded screeds and screeds installed on an isolating or insulating layer.
Suitable for heated screeds.
As repair mortar for concrete floors and cementitious screeds.
For layer thickness from 20 to 80 mm.

colour: grey

packaging: 25-kg-bag

Calculator

downloads:

Technical data sheet

Safety data sheet

Declaration of performance EN 13813 (CT-C25-F4-A12)

videos:

certificates:

name MED EC Type Examination Certificate Marine Equipment Directive 2014/90/EU Item No. MED/3.13 rules and standards Marine Equipment Directive 2014/90/EU Item No. MED/3.13 combined with product PCI Novoment® M3 plus

name MED EC Certificate of Conformity Marine Equipment Directive 2014/90/EU Item No MED/3.13, MED/3.18a, MED/3.18c rules and standards Marine Equipment Directive 2014/90/EU Item No MED/3.13, MED/3.18a, MED/3.18c combined with product PCI Carraflex®, PCI Carraferm®, PCI Novoment® Z1, PCI Novoment® M3 plus, PCI Nanofug®, PCI Seccoral® 1K, PCI Epoxigrund 390, PCI Ocean® Flex PUR, PCI UKL 302, PCI UFX 382, PCI VG 2, PCI Epoxigrund Rapid, PCI USP 32 S, PCI Nanofug® Premium

name Declaration of Conformity Marine Equipment Directive 2014/90/EU Item No. MED/3.13 rules and standards Marine Equipment Directive 2014/90/EU Item No. MED/3.13 combined with product PCI Novoment® Z1, PCI Novoment® M3 plus

name Licensing GEV EMICODE (EC1 PLUS R) rules and standards GEV EMICODE (EC1 PLUS R) combined with product PCI Novoment® M3 plus