Polymer modified tile adhesive

PCI FT® Flex

specially for large-format fully vitrified flagstones

features and benefits:

High non-sag properties even with heavy flagstones.
Increased yield due to special additives and a unique combination of fillers.
Plastic and workable mortar which can be easily applied by trowel.
Flexible, compensates movements in the substrate due to variations in temperature.
Low in chromates.
Very low emission - GEV EMICODE EC 1 PLUS R.
Meets the requirements of C2 TE S1 in accordance with EN 12 004 and the German "Guideline for flexible mortar" issued by Deutsche Bauchemie (German Building Industry).

EMICODE: EC1 PLUS R

fields of application:

For indoor and outdoor use.
For walls and floors.
For all ceramic coverings laid in a thin bed: non-vitrified tiles, vitrified tiles, fully-vitrified tiles, porcelaine mosaic, brick tiles and terracotta.
Especially suitable to lay large-format fully-vitrified tiles on walls.
On cement screeds, rough-ground anhydrite screeds, gypsum based floated screeds, renders, concrete, heated screeds, mastic asphalt (only inthe interior), plasterboards, gypsum fibre boards, plaster slabs and plasters.
For laying tiles and flagstones on PCI bonded screeds such as PCI Lastogum, PCI Seccoral 1K, PCI Seccoral 2K Rapid or PCI Apoflex F/W.
For laying ceramic coverings on PCI Pecilastic isolating membrane as well as PCI Pecilastic W and PCI Pecilastic U waterproofing membranes.
For adhesive bed thickness from 1 to 5 mm.

colour: grey

packaging: 18-kg-bag