Fibre reinforced concrete fairing coat

PCI Nanocret® FC

for wall and overhead application

Note:

Fairing coat of PCI Peciment II system tested to DAfStb guideline "Protection and repair of concrete elements" (German committee for reinforced concrete). With official test certificate. Listed as reprofiling mortar at Tiefbauamt Graubünden (Civil Engineering Office of Grisons/Switzerland). Listed as repair mortar to ÖBV (Austrian quality label).

features and benefits:

Low shrinkage during the curing phase.
Waterproof, resistant to weather conditions and frost, multi-purpose use indoors and out.
Creamy and workable consistency after adding water, easy to apply.
Fast setting, however processing time approx. 45 minutes.
Fine-grained surface, therefore no need to paint over.
Mechanical and manual application.
Tested to DAfStb guideline "Protection and repair of concrete elements".
Certified to EN 1504-3 R2.

fields of application:

For indoor and outdoor use.
For wall and overhead application.
For repair of honeycombs, filling of voids.
For resurfacing brickwork and render.
As fairing coat on concrete, fair-faced concrete and aerated concrete.
For levelling irregular wall surfaces prior to laying tiles and flagstones.
As levelling compound in swimming pools.
Fairing coat after concrete repair with PCI Peciment 50 at vertical fair-faced concrete surfaces not exposed to foot traffic in civil engineering and bridge construction to ZTV-ING for PCC II application: surfaces not exposed to vehicular traffic and subject to dynamical loads (e.g. bridge soffits).
As fairing coat for OS 4 or OS 5a coatings in accordance with DAfStb.
For layer thickness from 1 to 10 mm.