Flexible tile adhesive

PCI Flexmörtel® S1

for all ceramic coverings

Note:

All test certificates are available under www.pci-augsburg.eu

features and benefits:

Meets C2TE S1 requirements to DIN EN 12 004 and "guideline for flexible mortar".
Flexible, compensates elongations of the substrate due to variations in temperature and shrinkage.
High non-sag properties, even with heavy slabs.
For adhesive bed thicknesses from 1 to 10 mm.
Very low emissions, GEV EMICODE EC 1 PLUS R.
Low in chromates to TRGS 613.
Waterproof and temperature resistant from -30°C to +80°C, multi-purpose use indoors and out on walls and floors.

EMICODE: EC1 PLUS R

fields of application:

For indoor and outdoor use on walls and floors.
For the flexible laying of tiles and slabs.
For laying cement screeds with a residual moisture ≤4% CM*
For laying ceramic tiles on all PCI bonded screeds.
For laying tiles on heated screeds.
For laying tiles in swimming pools, pool surrounds, wet rooms and cold storage depots.
For laying tiles on mastic asphalt screed (only indoors) and all cement-based and gypsum-based substrates, glass mosaic and porcelain mosaic, firmly adhering PVC coverings and old ceramic coverings.
For laying polyurethane foam boards at basement walls in contact with the ground (perimeter insulation) on render/plaster, concrete, brickwork and waterproofing slurry; for mineral fibre boards (e.g. Isover or Rockwool), for cut rigid foam boards (e.g. polystyrene), for extruded rigid foam boards.
For the repair of irregular walls and floors prior to laying tiles and slabs.