Tile adhesive

PCI FT® Klebemörtel

for non-vitrified tiles and vitrified tiles

features and benefits:

Non-sag properties, no need for spacers. The bedded tiles bond immediately, but can still be adjusted to the correct position.
Good workability, therefore easy to apply.
Resistant to frost and permanent water, multi-purpose use indoors and out, even in swimming pools and cold storage rooms.
Good adhesion without pre-wetting and priming to concrete, cement screed and render.
Meets the requirements of C2T in accordance with DIN EN 12 004 (test report TU Munich).
With official test certificates for potable water application in accordance with DVGW worksheet W 270 and W 347 (Hygiene Institute Gelsenkirchen).
Test certificates are available under www.pci-augsburg.de.

EMICODE: EC1 PLUS R

fields of application:

For indoor and outdoor use.
For walls and floors.
For laying non-vitrified tiles, vitrified tiles and fully-vitrified tiles in a thin bed.
On cement screeds, rough-ground anhydrite screeds, gypsum based floated screeds, renders, concrete, heated screeds, mastic asphalt (indoors only), plaster boards, gypsum fibre boards, plaster slabs and plaster.
For laying ceramic coverings in areas exposed to permanent wetness such as swimming pools (indoors and out), health spas as well as in wet areas such as showers, toilets, bathrooms and cold storage rooms.
For adhesive bed thickness from 1 to 5 mm.

colour: grey

packaging: 25-kg-bag/ 5-kg-bag