Low-emission cement-based tile adhesives

Tile laying is not an easy matter and calls for both precision and high-quality construction materials. Especially tile adhesives face a wide variety of requirements as a result of the large number of installation options, different loads and the wide range of titles and ceramic coverings available. Key requirements to be met by good tile adhesives include ease of use, technical feasibility and low emissions.

Low emissions are becoming increasingly important in the construction industry as low-emission products are the only way to protect employees, consumers and the environment and to ensure a safe and hygienic interior climate. The PCI range includes low-emission cementitious tile adhesives which are formulated to prevent harmful fumes during and after processing.

Reset

Technical data sheet

PCI Carraflex®

Flexible thin-bed mortar for natural stones

PCI Carraflex®

Flexible thin-bed mortar for natural stones

Technical data sheet

PCI Carrament® grey

Medium-bed mortar for natural stones and fully-vitrified coverings

PCI Carrament® grey

Medium-bed mortar for natural stones and fully-vitrified coverings

Technical data sheet

PCI Carrament® white

Medium-bed mortar for natural stones and fully-vitrified coverings

PCI Carrament® white

Medium-bed mortar for natural stones and fully-vitrified coverings

Technical data sheet

PCI FT® Extra

Polymer modified tile adhesive for all ceramic tiles

PCI FT® Extra

Polymer modified tile adhesive for all ceramic tiles

Technical data sheet

PCI FT® Flex

Polymer modified tile adhesive specially for large-format fully vitrified flagstones

PCI FT® Flex

Polymer modified tile adhesive specially for large-format fully vitrified flagstones

Technical data sheet

PCI FT® Klebemörtel

Tile adhesive for non-vitrified tiles and vitrified tiles

PCI FT® Klebemörtel

Tile adhesive for non-vitrified tiles and vitrified tiles

Technical data sheet

PCI FT® Ment

Medium bed adhesive for leveling and tile fixing

PCI FT® Ment

Medium bed adhesive for leveling and tile fixing

Technical data sheet

PCI FT® Rapid

Flexible fast-acting tile adhesive for ceramic coverings

PCI FT® Rapid

Flexible fast-acting tile adhesive for ceramic coverings

Technical data sheet

PCI Flexmörtel®

Flexible tile adhesive for all ceramic coverings

PCI Flexmörtel®

Flexible tile adhesive for all ceramic coverings

Technical data sheet

PCI Flexmörtel® Premium

Flexible tile adhesive for ceramic tiles and natural stone

PCI Flexmörtel® Premium

Flexible tile adhesive for ceramic tiles and natural stone

Technical data sheet

PCI Flexmörtel® S1

Flexible tile adhesive for all ceramic coverings

PCI Flexmörtel® S1

Flexible tile adhesive for all ceramic coverings

Technical data sheet

PCI Flexmörtel® S1 Flott

Flexible flowable adhesive especially for large-format floor tiles

PCI Flexmörtel® S1 Flott

Flexible flowable adhesive especially for large-format floor tiles

Technical data sheet

PCI Flexmörtel® S1 Rapid

Flexible tile adhesive for all ceramic coverings

PCI Flexmörtel® S1 Rapid

Flexible tile adhesive for all ceramic coverings

Technical data sheet

PCI Flexmörtel® S2

Highly flexible tile adhesive for all ceramic coverings

PCI Flexmörtel® S2

Highly flexible tile adhesive for all ceramic coverings

Technical data sheet

PCI Nanolight®

Multi-use light, flexible adhesive for all kinds of substrates and ceramic coverings

PCI Nanolight®

Multi-use light, flexible adhesive for all kinds of substrates and ceramic coverings

Technical data sheet

PCI Nanolight® White

Multi-use white flexible adhesive for all kinds of substrates and all ceramic coverings

PCI Nanolight® White

Multi-use white flexible adhesive for all kinds of substrates and all ceramic coverings

Technical data sheet

PCI Pecitape® Bond

SMP adhesive for gluing waterproofing membranes at butt joints and overlaps

PCI Pecitape® Bond

SMP adhesive for gluing waterproofing membranes at butt joints and overlaps

PCI Carraflex®

Flexible thin-bed mortar for natural stones

PCI Carraflex®

Flexible thin-bed mortar for natural stones

For indoor and outdoor use.
For walls and floors.
For laying calibrated natural stones, especially white marble (e.g. Bianco-Carrara, Ajax, Arabescato) as well as Solnhofen stone and Jura marble in a thin adheisve bed.
On cement screed, rough-ground anhydrite screed, gypsum-based floated screed, concrete and precast concrete elements, aerated concrete, heated screed, plasterboards, gypsum fibre boards, dry screed, insulation boards, plaster slabs, plaster and old wall tiles and floor tiles.
For residential areas and business areas, basements, attics, hallways, kitchens, bathrooms, lavatories, staircases and base courses of buildings.
For ceramic tiles, flagstones and fully vitrified tiles if a white and polymer modified adhesive bed is required.

Technical data sheet

Declaration of performance EN 12004 (C2FT S1)

PCI Carrament® grey

Medium-bed mortar for natural stones and fully-vitrified coverings

PCI Carrament® grey

Medium-bed mortar for natural stones and fully-vitrified coverings

For indoor and outdoor use.
For walls and floors.
For laying natural stone slabs (also free length).
For laying large-format fully-vitrified flagstones.
For leveling irregular substrates before laying tiles.
PCI Carrament grey also suitable to lay clinker bricks in sewage construction.
On stairs and dados of houses, in living areas, on electric underfloor heating systems, heated screeds, balconies and terraces, in halls, rooms and corridors of industrial buildings, markets, institutional, service and administration buildings.

Declaration of performance EN 12004 (C2FE)

Technical data sheet

PCI Carrament® white

Medium-bed mortar for natural stones and fully-vitrified coverings

PCI Carrament® white

Medium-bed mortar for natural stones and fully-vitrified coverings

For indoor and outdoor use.
For walls and floors.
For laying natural stone slabs (also free length).
For laying large-format fully-vitrified flagstones.
For levelling irregular substrates before laying tiles.
PCI Carrament grey also suitable to lay clinker bricks in sewage construction.
On stairs and dados of houses, in living areas, on electric underfloor heating systems, heated screeds, balconies and terraces, in halls, rooms and corridors of industrial buildings, markets, institutional, service and administration buildings.

Technical data sheet

Declaration of performance EN 12004 (C2F)

PCI FT® Extra

Polymer modified tile adhesive for all ceramic tiles

PCI FT® Extra

Polymer modified tile adhesive for all ceramic tiles

For indoor and outdoor use.
For walls and floors.
For laying non-vitrified tiles, vitrified tiles and fully-vitrified tiles on PCI bonded waterproofing such as PCI Lastogum, PCI Seccoral 1K, PCI Seccoral 2K Rapid, PCI Pecilastic W and PCI Apoflex F/W.
On cement screeds, rough-ground anhydrite screeds, flowable plaster screeds, render, concrete, heated screeds, mastic asphalt (only indoors), plasterboards, gypsum fibre boards, gypsum planks and plaster.
For polyurethane foam boards on external basement walls in contact with soil (perimeter insulation) on plaster/render, concrete, brickwork and bonding slurries.
For mineral fibre boards, e.g. Isover or Rockwool.
For cut rigid foam boards, e.g. EPS.
For extruded rigid foam boards, e.g. XPS.
For adhesive bed thickness from 1 to 10 mm.

Technical data sheet

Declaration of performance EN 12004 (C2TE S1)

PCI FT® Flex

Polymer modified tile adhesive specially for large-format fully vitrified flagstones

PCI FT® Flex

Polymer modified tile adhesive specially for large-format fully vitrified flagstones

For indoor and outdoor use.
For walls and floors.
For all ceramic coverings laid in a thin bed: non-vitrified tiles, vitrified tiles, fully-vitrified tiles, porcelain mosaic, brick tiles and terracotta.
Especially suitable to lay large-format fully-vitrified tiles on walls.
On cement screeds, rough-ground anhydrite screeds, gypsum based floated screeds, render, concrete, heated screeds, mastic asphalt (only in the interior), plasterboards, gypsum fiber boards, plaster slabs and plaster.
For laying tiles and flagstones on PCI bonded screeds such as PCI Lastogum, PCI Seccoral 1K, PCI Seccoral 2K Rapid or PCI Apoflex F/W.
For laying ceramic coverings on PCI Pecilastic isolating membrane as well as PCI Pecilastic W and PCI Pecilastic U waterproofing membranes.
For adhesive bed thickness from 1 to 5 mm.

Technical data sheet

Declaration of performance EN 12004 (C2TE S1)

PCI FT® Klebemörtel

Tile adhesive for non-vitrified tiles and vitrified tiles

PCI FT® Klebemörtel

Tile adhesive for non-vitrified tiles and vitrified tiles

For indoor and outdoor use.
For walls and floors.
For laying non-vitrified tiles, vitrified tiles and fully-vitrified tiles in a thin bed.
On cement screeds, rough-ground anhydrite screeds, gypsum based floated screeds, renders, concrete, heated screeds, mastic asphalt (indoors only), plaster boards, gypsum fibre boards, plaster slabs and plaster.
For laying ceramic coverings in areas exposed to permanent wetness such as swimming pools (indoors and out), health spas as well as in wet areas such as showers, toilets, bathrooms and cold storage rooms.
For adhesive bed thickness from 1 to 5 mm.

Technical data sheet

Declaration of performance EN 12004 (C2T)

PCI FT® Ment

Medium bed adhesive for leveling and tile fixing

PCI FT® Ment

Medium bed adhesive for leveling and tile fixing

For indoor and outdoor use.
For walls and floors.
For practically void-free laying of vitrified tiles and fully-vitrified tiles.
For laying natural stones insensitive to staining.
For leveling irregular floors.
For laying tiles on heated screeds.
For laying terracotta and concrete ashlar with large tolerances in height.
For adhesive bed thickness from 2 to 25 mm.

Declaration of performance EN 12004 (C2E)

Technical data sheet

PCI FT® Rapid

Flexible fast-acting tile adhesive for ceramic coverings

PCI FT® Rapid

Flexible fast-acting tile adhesive for ceramic coverings

For indoor and outdoor use.
For walls and floors.
For laying ceramic tiles and flagstones on to the bonded screeds PCI Lastogum, PCI Seccoral 1K, PCI Seccoral 2K Rapid, PCI Apoflex and PCI Pecilastic W in accordance with the valid regulations of the building standard list.
For the installation of fully vitrified tiles on walls and floors.
On cement screeds, rough-ground anhydrite screeds, gypsum based floated screeds, renders, concrete, heated screeds, mastic asphalt (only indoors), plasterboards and gypsum fibre boards, plaster slabs and plasters.
For adhesive bed thickness from 1 to 5 mm.

Technical data sheet

Declaration of performance EN 12004 (C2FT S1)

PCI Flexmörtel®

Flexible tile adhesive for all ceramic coverings

PCI Flexmörtel®

Flexible tile adhesive for all ceramic coverings

For indoor and outdoor use.
For walls and floors.
For laying ceramic tiles and flagstones, porcelain mosaic, brick tiles, clinker bricks and fully vitrified tiles.
In swimming pools, pool surrounds, wet rooms and cold storage depots.
On cement screeds, rough-ground anhydrite screeds, gypsum based floated screeds, precast concrete elements, aerated concrete, heated screeds, plasterboards, gypsum fibre boards, dry screeds, mastic asphalt (only indoors), insulation boards, plaster slabs, plaster and on existing wall and floor tiles.
For laying ceramic on the bonded waterproofing PCI Lastogum, PCI Seccoral 1K, PCI Seccoral 2K Rapid and PCI Apoflex F/W in accordance with the official test certificates.
For laying ceramic tiles on PCI Pecilastic isolating fabric underlay, PCI Pecilastic W flexible waterproofing membrane and PCI Pecilastic U isolating and waterproofing membrane.
For laying polyurethane foam boards at basement walls in contact with the ground (perimeter insulation) on render/plaster, concrete, brickwork and waterproofing slurry; for mineral fibre boards (e.g. Isover or Rockwool), for cut rigid foam boards (e.g. polystyrene), for extruded rigid foam boards.

Technical data sheet

Declaration of performance EN 12004 (C2TE S1)

PCI Flexmörtel® Premium

Flexible tile adhesive for ceramic tiles and natural stone

PCI Flexmörtel® Premium

Flexible tile adhesive for ceramic tiles and natural stone

For indoor and outdoor use.
For floors.
For covering a cement screed/cementitious heated screed ≤ 4% CM.
For laying tiles and natural stones.
Especially for the exterior.
For balconies, terraces, underfloor heating as well as industrial areas subject to mechanical stress such as halls, rooms and corridors in industrial buildings, markets, institutional buildings, administration buildings and commercial buildings.
For laying tiles on a cement screed, rough-ground anhydrite screed, heated screed, dry screed, mastic asphalt screed (only indoors) and on old floor tiles.
For levelling irregular substrates before tiling.

Declaration of performance EN 12004 (C2FE S1)

Technical data sheet

PCI Flexmörtel® S1

Flexible tile adhesive for all ceramic coverings

PCI Flexmörtel® S1

Flexible tile adhesive for all ceramic coverings

For indoor and outdoor use on walls and floors.
For the flexible laying of tiles and slabs.
For laying cement screeds with a residual moisture ≤4% CM*
For laying ceramic tiles on all PCI bonded screeds.
For laying tiles on heated screeds.
For laying tiles in swimming pools, pool surrounds, wet rooms and cold storage depots.
For laying tiles on mastic asphalt screed (only indoors) and all cement-based and gypsum-based substrates, glass mosaic and porcelain mosaic, firmly adhering PVC coverings and old ceramic coverings.
For laying polyurethane foam boards at basement walls in contact with the ground (perimeter insulation) on render/plaster, concrete, brickwork and waterproofing slurry; for mineral fibre boards (e.g. Isover or Rockwool), for cut rigid foam boards (e.g. polystyrene), for extruded rigid foam boards.
For the repair of irregular walls and floors prior to laying tiles and slabs.

Technical data sheet

Declaration of performance EN 12004 (C2TE S1)

PCI Flexmörtel® S1 Flott

Flexible flowable adhesive especially for large-format floor tiles

PCI Flexmörtel® S1 Flott

Flexible flowable adhesive especially for large-format floor tiles

For indoor and outdoor use.
For floors.
For covering a cement screed/cementitious heated screed ≤ 4% CM.
For laying especially large-format floor tiles.
For practically void-free laying of large-format vitrified tiles and fully-vitrified tiles; also for coverings with irregular surfaces such as terracotta or Terrazzo.
For balconies, terraces, underfloor heating as well as industrial areas subject to mechanical stress such as halls, rooms and corridors in industrial buildings, markets, institutional buildings, administration buildings and commercial buildings.
For laying natural stones insensitive to staining.
For levelling irregular substrates before tiling.

Declaration of performance EN 12004 (C2 E S1)

Technical data sheet

PCI Flexmörtel® S1 Rapid

Flexible tile adhesive for all ceramic coverings

PCI Flexmörtel® S1 Rapid

Flexible tile adhesive for all ceramic coverings

For indoor and outdoor use.
For walls and floors.
For the flexible laying of tiles and slabs.
For laying natural stones.
For laying cement screeds with a residual moisture ≤4% CM.
For laying ceramic tiles on all types of PCI bonded screeds.
For laying tiles on a heated screed.
For laying tiles in swimming pools, pool surrounds, wet rooms and cold storage depots.
For laying tiles on mastic asphalt screed (only indoors) and all cement-based and gypsum-based substrates, glass mosaic and porcelain mosaic, firmly bonding PVC coverings and old ceramic coverings.
For laying polyurethane foam boards at basement walls in contact with the ground (perimeter insulation) on render/plaster, concrete, brickwork and waterproofing slurry; for mineral fiber boards (e.g. Isover or Rockwool), for cut rigid foam boards (e.g. polystyrene), for extruded rigid foam boards.
For the repair of irregular walls and floors prior to laying tiles and slabs.

Declaration of performance EN 12004 (C2FT S1)

Technical data sheet

PCI Flexmörtel® S2

Highly flexible tile adhesive for all ceramic coverings

PCI Flexmörtel® S2

Highly flexible tile adhesive for all ceramic coverings

For indoor and outdoor use.
For walls and floors.
For laying cement screeds/heated cement screeds older ≥ 3 days (as soon as walkable).*
Especially for laying large-format flagstones on heated screeds.
For laying ceramic tiles and flagstones, porcelain mosaic, clinker tiles, clinkers and fully vitrified tiles.
For laying tiles in swimming pools, pool surrounds, wet rooms and cold storage depots.
On rough-ground anhydrite screed, gypsum based floated screed, precast concrete elements, aerated concrete, heated screed, plasterboards, gypsum fiber boards, dry screed, mastic asphalt (only indoors), insulation boards, plaster slabs, plaster and on existing wall and floor tiles.
For laying ceramic on PCI bonded waterproofing layers and PCI isolation layers.
For the repair of irregular walls and floors prior to laying tiles and flagstones.

Technical data sheet

Declaration of performance EN 12004 (C2TE S2)

PCI Nanolight®

Multi-use light, flexible adhesive for all kinds of substrates and ceramic coverings

PCI Nanolight®

Multi-use light, flexible adhesive for all kinds of substrates and ceramic coverings

For indoor and outdoor use.
For walls and floors.
For all substrates: cement screed, rough-ground anhydrite screed, gypsum-based floating screed, concrete, precast concrete elements, aerated concrete, heated screed, plasterboards, gypsum fiber boards, dry screed, magnesite screed, mastic asphalt (only indoors), insulation boards, gypsum blocks, plaster, render, gauged render, brickwork, old ceramic coverings etc., metal substrates (only indoors), firmly adhering PVC coverings.
For all ceramic coverings laid in a thin bed or medium bed: non-vitrified tiles, vitrified tiles, fully-vitrified tiles, porcelain mosaic, glass mosaic, glass tiles, brick tiles and terracotta.
For laying tiles and flagstones on PCI Pecidur HR foam supporting elements, PCI Polysilent impact sound insulation and isolation board as well as PCI Pecilastic isolating fabric underlay.
For laying tiles and flagstones on PCI Lastogum bonded waterproofing (e.g. private bathrooms), PCI Seccoral (e.g. swimming pool and terraces) or PCI Apoflex (e.g. industrial kitchens).
For repairing and leveling irregular wall surfaces and floor surfaces (e.g. brickwork, render, screed) before laying tiles.

Technical data sheet

Declaration of performance EN 12004 (C2TE S1)

PCI Nanolight® White

Multi-use white flexible adhesive for all kinds of substrates and all ceramic coverings

PCI Nanolight® White

Multi-use white flexible adhesive for all kinds of substrates and all ceramic coverings

For indoor and outdoor use.
For walls and floors.
Colour white.
For all substrates: cement screed, rough-ground anhydrite screed, gypsum-based floated screed, concrete, aerated concrete, heated screed, plasterboard, gypsum fibre board, magnesite screed, mastic asphalt (only indoors), gypsum block, plaster, render, gauged render, brickwork, old ceramic covering and smooth, wooden substrate able to bear weight such as particle boards, OSB boards etc., metal substrates (only indoors), firmly adhering PVC coverings.
For all ceramic coverings: non-vitrified tiles, vitrified tiles, fully-vitrified tiles, porcelain mosaic, glass mosaic, glass tiles, brick tiles and terracotta.
Especially suitable for laying glass tiles and glass mosaic.
For laying tiles and flagstones on PCI Pecidur HR foam supporting elements, PCI Polysilent impact sound insulation and isolating board as well as PCI Pecilastic isolating and waterproofing membrane.
For laying tiles and flagstones on PCI Lastogum bonded waterproofing (e.g. private bathroom), PCI Seccoral (e.g. swimming pool and terrace) or PCI Apoflex (e.g. industrial kitchen).
For repairing and levelling irregular wall surfaces and floor surfaces (e.g. brickwork, render, screed) before laying tiles and flagstones.

Technical data sheet

Declaration of performance EN 12004 (C2TE S1)

PCI Pecitape® Bond

SMP adhesive for gluing waterproofing membranes at butt joints and overlaps

PCI Pecitape® Bond

SMP adhesive for gluing waterproofing membranes at butt joints and overlaps

For gluing waterproofing tapes such as PCI Pecitape 250, PCI Pecitape 120, PCI Pecitape Objekt as well as PCI Pecitape 90°A prefabricated external corners and PCI Pecitape 90°I prefabricated internal corners in floor/wall junctions in combination with PCI Pecilastic U or PCI Pecilastic W.
For gluing overlaps of the flexible waterproofing membrane PCI Pecilastic W.
For gluing the area around butt joints of PCI Pecilastic U with waterproofing tapes.
For gluing the area around butt joints with PCI waterproofing tapes if PCI Pecilastic W is laid edge to edge and not overlapping.

Technical data sheet

Low-emission cementitious tile adhesives – the eco-friendly all-rounders

Cementitious tile adhesives boast impressive versatility. Thanks to a variety of additives, the properties of the adhesive such as sag resistance, adhesion or flexibility can be adapted to meet specific requirements. In addition, the consistency of the adhesive can be set individually to make application as convenient as possible. Cementitious tile adhesives are normally subdivided into

thin-bed adhesives,
flowable adhesives, and
medium-bed adhesives.

It is therefore possible to adapt the adhesive individually to the variety of requirements posed by different substrates and coverings such as sensitive natural stones in order to construct an effective, durable tiled covering. The additional low-emission properties are a further benefit of our low-emission tile adhesives as they offer both your employees and your customers the highest possible safety levels. You should therefore choose products with the EMICODE: EC 1 PLUS classification, which has been awarded to all our low-emission products and systems.

Find the perfect low-emission tile adhesive for your construction project

You may wish to use a low-emission tile adhesive for your construction project but you may not know which product properties are particularly important. If this is the case, just contact your local PCI adviser for competent advice on low-emission construction. Your specific application, your floor covering and the individual load parameters of your project will all play a role in determining the ideal low-emission adhesive for your tiling.

The area to be covered is also important for the selection of a suitable tile adhesive. In order to conserve resources, you can use our convenient consumption calculator to calculate precisely the quantity of tile adhesive required on the basis of the number of square meters and the tooth spacing of your trowel.

PCI Nanolight®

PCI Nanofug® Premium

PCI Barraseal® Turbo

PCI Nanolight®

PCI Nanofug® Premium

PCI Barraseal® Turbo

PCI Nanolight®

PCI Nanofug® Premium

PCI Barraseal® Turbo

PCI Nanolight®

PCI Nanofug® Premium

PCI Barraseal® Turbo

Low-emission cement-based tile adhesives

PCI Carraflex®

PCI Carraflex®

PCI Carrament® grey

PCI Carrament® grey

PCI Carrament® white

PCI Carrament® white

PCI FT® Extra

PCI FT® Extra

PCI FT® Flex

PCI FT® Flex

PCI FT® Klebemörtel

PCI FT® Klebemörtel

PCI FT® Ment

PCI FT® Ment

PCI FT® Rapid

PCI FT® Rapid

PCI Flexmörtel®

PCI Flexmörtel®

PCI Flexmörtel® Premium

PCI Flexmörtel® Premium

PCI Flexmörtel® S1

PCI Flexmörtel® S1

PCI Flexmörtel® S1 Flott

PCI Flexmörtel® S1 Flott

PCI Flexmörtel® S1 Rapid

PCI Flexmörtel® S1 Rapid

PCI Flexmörtel® S2

PCI Flexmörtel® S2

PCI Nanolight®

PCI Nanolight®

PCI Nanolight® White

PCI Nanolight® White

PCI Pecitape® Bond

PCI Pecitape® Bond

PCI Carraflex®

PCI Carraflex®

PCI Carrament® grey

PCI Carrament® grey

PCI Carrament® white

PCI Carrament® white

PCI FT® Extra

PCI FT® Extra

PCI FT® Flex

PCI FT® Flex

PCI FT® Klebemörtel

PCI FT® Klebemörtel

PCI FT® Ment

PCI FT® Ment

PCI FT® Rapid

PCI FT® Rapid

PCI Flexmörtel®

PCI Flexmörtel®

PCI Flexmörtel® Premium

PCI Flexmörtel® Premium

PCI Flexmörtel® S1

PCI Flexmörtel® S1

PCI Flexmörtel® S1 Flott

PCI Flexmörtel® S1 Flott

PCI Flexmörtel® S1 Rapid

PCI Flexmörtel® S1 Rapid

PCI Flexmörtel® S2

PCI Flexmörtel® S2

PCI Nanolight®

PCI Nanolight®

PCI Nanolight® White

PCI Nanolight® White

PCI Pecitape® Bond