PCI Novoment® M1 plus

Ready-mixed, fast-setting screed mortar for fast-curing cement screeds
PCI Novoment® M1 plus
Dealer Search
features and benefits
fields of application
Calculator
downloads
certificates
  • Can be tiled after approx. 1 day, walkable after approx. 3 hours.
  • Ready-mixed mortar, therefore no on-site mixing with sand required.
  • Extended processing time, can be worked with and smoothed for almost 1 hour despite of short curing time.
  • Temperature resistant from -30°C to +80°C, therefore suitable for balconies, terraces, garages, industrial floor coverings cleaned with superheated steam.
  • Insensitive to moisture, therefore suitable for areas exposed to permanent wetness.
  • Limited bending (suitability test to 6.2 DIN 18560-2), therefore reduction of layer thickness possible to 30 mm for screeds on an insulation layer according to chart 1 (perpendicular load capacity ≤ 2 kN/m²) or chart 2 (perpendicular load capacity, area load ≤ 3 kN/m²), in case of heated screeds the pipes must be covered by a layer thickness of 30 mm.

EMICODE: EC1 PLUS
colour: grey
packaging: 25-kg-bag
  • For indoor and outdoor use.
  • Suitable for direct use.
  • For areas exposed to permanent wetness.
  • For fast-curing bonded screeds and screeds installed on an isolating layer or insulation layer.
  • Suitable for heated screeds.
  • As repair mortar for quick repairs of industrial floors.
  • For layer thickness from 20 to 80 mm.
  • Very low emissions, GEV-EMICODE EC 1 PLUS.
PCI Novoment® M1 plus
Ready-mixed, fast-setting screed mortar
for fast-curing cement screeds
Technical Datasheet: 233
Thickness (mm):
Area (m²):
Your Result:
Quantity Required approximately (kg):
corresponds
25-kg-bag (pieces):
name MED EC Type Examination Certificate Marine Equipment Directive 96/98/EC Item No. A.1/3.1 rules and standards Marine Equipment Directive 96/98/EC Item No. A.1/3.1 combined with product PCI Novoment® M1 plus
name MED EC Certificate of Conformity Marine Equipment Directive 96/98/EC Item No. A.1/3.1, A.1/3.18c rules and standards Marine Equipment Directive 96/98/EC Item No. A.1/3.1, A.1/3.18c combined with product PCI Lastogum®, PCI Nanolight®, PCI Durafug® NT, PCI Durapox® NT, PCI Durapox® NT plus, PCI Novoment® M1 plus, PCI Nanofug®, PCI Seccoral® 1K, PCI Epoxigrund 390, PCI STL 39, PCI Gisogrund® 404, PCI Flexmörtel® S2
name Declaration of Conformity Marine Equipment Directive 2014/90/EU Item No. MED/3.1 rules and standards Marine Equipment Directive 2014/90/EU Item No. MED/3.1 combined with product PCI Periplan® Extra, PCI Novoment® M1 plus, PCI Epoxigrund 390, PCI STL 39
name Licensing GEV EMICODE (EC1 PLUS R) rules and standards GEV EMICODE (EC1 PLUS R) combined with product PCI Novoment® M1 plus