PCI Peciment® 50

Repair mortar for bridge construction and civil engineering work to ZTV-ING and maintenance guideline
PCI Peciment® 50
Dealer Search
features and benefits
fields of application
Calculator
downloads
certificates
  • Included in the BASt list (German Transport Authorities) and the BAW list (German Federal Waterways Engineering and Research Institute) , PCI Peciment 50 is tested in accordance with ZTV-ING and quality controlled in accordance with TL/TP BE-PCC. Tested in compliance with ZTV-W LB 219.
  • Tested for the application in facilities for storage, filling and handling of hazardous goods.
  • Ready to use when mixed with water.
  • For layer thickness from 10 to 50 mm, to be applied on floors in one layer up to a thickness of 50 mm.
  • Resistant to wear and ageing, achieves high strength.
  • Low shrinkage and crack-free curing with appropriate post-treatment, even in case of dynamical stress during the application and curing time.
  • High resistance to carbonation, the corrosion-protective effect of the cement is retained.
  • Resistant to frost and de-icing salt, multi-purpose use indoors and out.
  • Impermeable to water.
  • Permeable to water vapour.
  • Resistant to bitumen.

Note: Concrete substitute of the PCI Peciment II system for the application PCC I and PCC II according to ZTV-ING. With official test certificate.

colour: gray
packaging: 25-kg-bag
  • For concrete repair and new installation of bonded coverings and for the preventive and additional protection of concrete surfaces on bridges or comparable civil engineering construction to ZTV-ING and maintenance guideline for the following applications:
    PCC I: Surfaces exposed to traffic, subject to dynamical stress (e.g. under bridge coverings).
    PCC II: Surfaces not exposed to traffic, subject to dynamical stress (e.g. undersides of bridges).
  • For layer thickness from 10 – 50 mm.
PCI Peciment® 50
Repair mortar
for bridge construction and civil engineering work to ZTV-ING and maintenance guideline
Technical Datasheet: 110
Thickness (mm):
Area (m²):
Your Result:
Required quantity of dry mortar around (kg):
corresponds
25-kg-bag (pieces):
name Classification report EN 13501-1 (A2fl-s1) rules and standards EN 13501-1 (A2fl-s1) combined with product PCI Peciment® 50, PCI Pecihaft®
name Classification report EN 13501-1 (A2 - s1, d0) rules and standards EN 13501-1 (A2 - s1, d0) combined with product PCI Peciment® 50, PCI Pecihaft®