PCI Aposan®

Heavy duty repair mortar

for small concrete areas, corners, joints and edges

Technical data sheet

Heavy duty repair mortar

for small concrete areas, corners, joints and edges

Technical data sheet

Areas of application

Product features

Areas of application

For indoor and outdoor use.
For walls and floors.
For repairing wear surfaces and break-outs in concrete floors and cement screeds, pre-fabricated concrete elements, reinforced concrete supports, concrete pipes and similar.
For covings.
For repairing and reprofiling garage door thresholds, edge of steps and joint sides.
For repairing small-area damaged spots before applying subsequent coatings or sealers.
For leveling worn-out steps.
For thin layers from 2 mm thickness in floor areas.

Product features

Solvent free, no damage to environment and operative due to solvent vapors.
High resistance to wear, high abrasive loads and rolling loads.
Chemical resistant to a variety of acids, alkalines, oils and other chemicals (see "Chemical Resistance").
Easy to apply, good trowelable properties even in thicker layers.
Non-sag properties, can be applied in thicker layers at vertical areas.
Non slip and easy to clean.
Two components, epoxy resin with hardener.

Colors: grey

Forms of delivery: 5-kg-pail

Consumption calculator

Your specification

Thickness in composite (mm)

Area (m²)

Calculate now

Your Result

Quantity Required approximately

kg

corresponds

5-kg-pail

pieces

* for thickness between 2mm to 50mm

This consumption calculation included in the program contains approximate values based on experiences which might considerably vary upwards and also downwards depending on the structure of substrate, type of tiles, different profiles on the reverse sides, type of tiling tools, work method a.o. Calculations are therefore not allowed to be based on these values. In case of larger projects we recommend to assess the consumption by making a trial surface. Applications in the combined method (buttering-floating) increase the consumption by approx. 20 to 25%. In case of powder products the data relate to the consumption of dry powder for easier calculation of the material requirement.