Alkali resistant; the glass fibers have a durable resistance in alkaline media as well as in acid media.
High tensile strength and high modulus of elasticity to effectively increase the tensile strength and bending tensile strength of suitable PCI floor levelers.
Fast work progress.
High reliability in application (test certificate by TU Munich).
Low construction height of the system with suitable PCI floor levelers from 5 mm upwards. PCI Armiermatte GFM:
With special binder holding together the glass fibers in mat form when delivered; the glass fibers dissolve without any affects when in contact with suitable PCI floor levelers.
No interference of the composite by a separating finish on the reinforcement between fiber and PCI floor leveling compound as well as PCI floor leveler and primed substrate.
The reinforcing fibers remain in a high concentration – plane in all horizontal directions - in the lower boundary area of the leveling layer.
Complete encasement of reinforcement fibers by the PCI floor leveler is possible. PCI Armiermatte GFS:
Fiber strands fixed on a mesh with carrier fleece.
Simple handling and embedding in suitable PCI floor levelers.
Reinforcement does not float on the surface.
colour: white, with red carrier foil
For reinforcing and increasing the tensile strength of suitable cementitious PCI floor levelers to produce a composite leveler in layer thicknesses from 5 mm - on substrates with existing cracks and dummy joints - on substrates sensitive to forming cracks and mixed substrates - on substrates slightly vibrating or sensitive to vibrations (e.g. wooden floorboard constructions). PCI Armiermatte GFM:
Suitable for substrates with cracks up to a width of approx. 3 mm and minor movement to be expected. PCI Armiermatte GFS:
In addition to PCI Armiermatte GFM for cracks from 3 mm to 5 mm and major movement to be expected.