PCI FT® Klebemörtel

Tile adhesive for non-vitrified tiles and vitrified tiles
PCI FT® Klebemörtel
Dealer Search
features and benefits
fields of application
Calculator
downloads
certificates
  • Non-sag properties, no need for spacers. The bedded tiles bond immediately, but can still be adjusted to the correct position.
  • Good workability, therefore easy to apply. 
  • Resistant to frost and permanent water, multi-purpose use indoors and out, even in swimming pools and cold storage rooms.
  • Good adhesion without pre-wetting and priming to concrete, cement screed and render.
  • Meets the requirements of C2T in accordance with DIN EN 12004 (test report TU Munich).
  • With official test certificates for potable water application in accordance with DVGW worksheet W 270 and W 347 (Hygiene Institute Gelsenkirchen).
    Test certificates are available under www.pci-augsburg.de.

EMICODE: EC1 PLUS
colour: grey
packaging: 25-kg-bag/ 5-kg-bag
  • For indoor and outdoor use.
  • For walls and floors.
  • For laying non-vitrified tiles, vitrified tiles and fully-vitrified tiles in a thin bed.
  • On cement screeds, rough-ground anhydrite screeds, gypsum based floated screeds, renders, concrete, heated screeds, mastic asphalt (indoors only), plaster boards, gypsum fibre boards, plaster slabs and plaster.
  • For laying ceramic coverings in areas exposed to permanent wetness such as swimming pools (indoors and out), health spas as well as in wet areas such as showers, toilets, bathrooms and cold storage rooms.
  • For adhesive bed thickness from 1 to 5 mm.
PCI FT® Klebemörtel
Tile adhesive
for non-vitrified tiles and vitrified tiles
Technical Datasheet: 130
Notch:
Area (m²):
Your Result:
Quantity Required approximately (kg):
corresponds
25-kg-bag (pieces):
5-kg-bag (pieces):
name Classification report EN 13501-1 (A1) rules and standards EN 13501-1 (A1) combined with product PCI FT® Klebemörtel
name Classification report EN 13501-1 (A1fl) rules and standards EN 13501-1 (A1fl) combined with product PCI FT® Klebemörtel
name Licensing GEV EMICODE (EC1 PLUS R) rules and standards GEV EMICODE (EC1 PLUS R) combined with product PCI FT® Klebemörtel