PCI FT® Rapid
Flexible fast-acting tile adhesive
for ceramic coverings
Areas of application
- For indoor and outdoor use.
- For walls and floors.
- For laying ceramic tiles and flagstones on to the bonded screeds PCI Lastogum, PCI Seccoral 1K, PCI Seccoral 2K Rapid, PCI Apoflex and PCI Pecilastic W in accordance with the valid regulations of the building standard list.
- For the installation of fully vitrified tiles on walls and floors.
- On cement screeds, rough-ground anhydrite screeds, gypsum based floated screeds, renders, concrete, heated screeds, mastic asphalt (only indoors), plasterboards and gypsum fibre boards, plaster slabs and plasters.
- For adhesive bed thickness from 1 to 5 mm.
With official test certificates
Product features
- High moistening ability, also suitable for fully vitrified tiles and low-absorbent substrates (e.g. very smooth concrete).
- Fast curing, walkable and groutable after 3 hours, therefore especially suitable if time is a factor.
- Flexible, meets the requirements of the regulation "Guideline for flexible mortar" (Deutsche Bauchemie e.V.).
- Non-sag properties, no need for battens and spacers. The laid tiles adhere immediately but can still be adjusted to the correct position.
- Good workability, therefore easy to apply.
Colors:
grey
Forms of delivery:
25-kg-bag
YOUR DIRECT CONTACT
Downloads
Technical data sheet
Safety data sheet
Declaration of performance EN 12004 (C2FT S1)
Sustainability data sheet
Classification report EN 13501-1 (A2-s1,d0)
Combined with product:
PCI FT® Rapid
Classification report EN 13501-1 (A2fl-s1)
Combined with product:
PCI FT® Rapid
Licensing GEV EMICODE (EC1 PLUS)
Combined with product:
PCI FT® Rapid
