PCI Novoment® M3 plus

Ready-mixed, fast-setting screed mortar for fast track cement screeds
PCI Novoment® M3 plus
Dealer Search
features and benefits
fields of application
Calculator
downloads
certificates
  • Can be tiled after approx. 3 days, walkable after approx. 1 day.
  • Ready-to-mix mortar, no on-site mixing with sand required.
  • Long processing time, can be worked with and smoothed for almost 1 hour despite of short curing time.
  • Suitable for application by pump, even at higher temperatures.
  • Temperature resistant from -30°C to +80°C, therefore suitable for balconies, terraces, garages, industrial floor coverings cleaned with superheated steam.
  • Insensitive to moisture, therefore suitable for areas exposed to permanent wetness.
  • Limited bending (suitability test to 6.2 DIN 18560-2), it is therefore possible to reduce layer thickness to 30 mm for screeds on insulation layer according to chart 1 (perpendicular load capacity ≤ 2 kN/m²) or chart 2 (perpendicular load capacity, area load ≤ 3 kN/m²), in case of heated screeds the pipes must be covered by a layer thickness of 30 mm.

EMICODE: EC1 PLUS
colour: grey
packaging: 25-kg-bag
  • For indoor and outdoor use, also for direct use.
  • For areas which are exposed to permanent wetness.
  • For fast track bonded screeds and screeds installed on an isolating or insulating layer.
  • Suitable for heated screeds.
  • As repair mortar for concrete floors and cementitious screeds.
  • For layer thickness from 20 to 80 mm.
PCI Novoment® M3 plus
Ready-mixed, fast-setting screed mortar
for fast track cement screeds
Technical Datasheet: 235
Thickness (mm):
Area (m²):
Your Result:
Quantity Required approximately (kg):
corresponds
25-kg-bag (pieces):
name MED EC Type Examination Certificate Marine Equipment Directive 2014/90/EU Item No. MED/3.13 rules and standards Marine Equipment Directive 2014/90/EU Item No. MED/3.13 combined with product PCI Novoment® M3 plus
name MED EC Certificate of Conformity Marine Equipment Directive 2014/90/EU Item No MED/3.13, MED/3.18a, MED/3.18c rules and standards Marine Equipment Directive 2014/90/EU Item No MED/3.13, MED/3.18a, MED/3.18c combined with product PCI Carraflex®, PCI Carraferm®, PCI Novoment® Z1, PCI Novoment® M3 plus, PCI Nanofug®, PCI Seccoral® 1K, PCI Epoxigrund 390, PCI Ocean® Flex PUR, PCI UKL 302, PCI UFX 382, PCI VG 2, PCI Epoxigrund Rapid, PCI USP 32 S, PCI Nanofug® Premium
name Declaration of Conformity Marine Equipment Directive 2014/90/EU Item No. MED/3.13 rules and standards Marine Equipment Directive 2014/90/EU Item No. MED/3.13 combined with product PCI Novoment® Z1, PCI Novoment® M3 plus
name Licensing GEV EMICODE (EC1 PLUS R) rules and standards GEV EMICODE (EC1 PLUS R) combined with product PCI Novoment® M3 plus