PCI FT® Flex

Polymer modified tile adhesive specially for large-format fully vitrified flagstones
PCI FT® Flex
Dealer Search
features and benefits
fields of application
Calculator
downloads
videos
certificates
  • High non-sag properties even with heavy flagstones.
  • Increased yield due to special additives and a unique combination of fillers.
  • Plastic and workable mortar which can be easily applied by trowel.
  • Flexible, compensates movements in the substrate due to variations in temperature.
  • Low in chromates.
  • Very low emission - GEV EMICODE EC 1 PLUS R.
  • Meets the requirements of C2 TE S1 in accordance with EN 12 004 and the German "Guideline for flexible mortar" issued by Deutsche Bauchemie (German Building Industry).

EMICODE: EC1 PLUS
colour: grey
packaging: 18-kg-bag
  • For indoor and outdoor use.
  • For walls and floors.
  • For all ceramic coverings laid in a thin bed: non-vitrified tiles, vitrified tiles, fully-vitrified tiles, porcelaine mosaic, brick tiles and terracotta.
  • Especially suitable to lay large-format fully-vitrified tiles on walls.
  • On cement screeds, rough-ground anhydrite screeds, gypsum based floated screeds, renders, concrete, heated screeds, mastic asphalt (only inthe interior), plasterboards, gypsum fibre boards, plaster slabs and plasters.
  • For laying tiles and flagstones on PCI bonded screeds such as PCI Lastogum, PCI Seccoral 1K, PCI Seccoral 2K Rapid or PCI Apoflex F/W.
  • For laying ceramic coverings on PCI Pecilastic isolating membrane as well as PCI Pecilastic W and PCI Pecilastic U waterproofing membranes.
  • For adhesive bed thickness from 1 to 5 mm.
PCI FT® Flex
Polymer modified tile adhesive
specially for large-format fully vitrified flagstones
Technical Datasheet: 131
Notch:
Area (m²):
Your Result:
Quantity Required approximately (kg):
corresponds
18-kg-bag (pieces):
PCI FT Flex
name Licensing GEV EMICODE (EC1 PLUS R) rules and standards GEV EMICODE (EC1 PLUS R) combined with product PCI FT® Flex