PCI FT® Extra

Polymer modified tile adhesive for all ceramic tiles
PCI FT® Extra
Dealer Search
features and benefits
fields of application
Calculator
downloads
certificates
  • High moistening properties, even suitable for fully-vitrified tiles and on low-absorbent substrates (e. g. smooth-cast concrete surfaces).
  • Flexible.
  • Non-sag properties, no wedging necessary. The bedded tiles immediately bond but can still be adjusted to correct position.
  • Good workability, therefore easy to apply.
  • Meets
    - the guideline "Flexible mortar" issued by Deutsche Bauchemie e.V. (German Construction Chemicals Industry),
    - the classification C2 TE S1 to DIN EN 12004
    - the test principles to issue an official test certificate for bonded waterproofing in combination with PCI bonded waterproofing such as PCI Lastogum, PCI Seccoral 1K, PCI Seccoral 2K Rapid, PCI Pecilastic W or PCI Apoflex F/W.
    All test certificates are available under www.pci-augsburg.de.

EMICODE: EC1 PLUS
packaging: 25-kg-bag
  • For indoor and outdoor use.
  • For walls and floors.
  • For laying non-vitrified tiles, vitrified tiles and fully-vitrified tiles on PCI bonded waterproofing such as PCI Lastogum, PCI Seccoral 1K, PCI Seccoral 2K Rapid, PCI Pecilastic W and PCI Apoflex F/W.
  • On cement screeds, rough-ground anhydrite screeds, flowable plaster screeds, render, concrete, heated screeds, mastic asphalt (only indoors), plasterboards, gypsum fibre boards, gypsum planks and plaster.
  • For polyurethane foam boards on external basement walls in contact with soil (perimeter insulation) on plaster/render, concrete, brickwork and bonding slurries.
  • For mineral fibre boards, e.g. Isover or Rockwool.
  • For cut rigid foam boards, e.g. EPS.
  • For extruded rigid foam boards, e.g. XPS.
  • For adhesive bed thickness from 1 to 5 mm.
PCI FT® Extra
Polymer modified tile adhesive
for all ceramic tiles
Technical Datasheet: 114
Notch:
Area (m²):
Your Result:
Quantity Required approximately (kg):
corresponds
25-kg-bag (pieces):
name Test report ISO 13007-1 (C2TE) rules and standards ISO 13007-1 (C2TE) combined with product PCI FT® Extra
name Classification report EN 13501-1 (A1fl) rules and standards EN 13501-1 (A1fl) combined with product PCI FT® Extra
name Classification report EN 13501-1 (A1) rules and standards EN 13501-1 (A1) combined with product PCI FT® Extra
name Licensing GEV EMICODE (EC 1 PLUS R) rules and standards GEV EMICODE (EC 1 PLUS R) combined with product PCI FT® Extra