PCI Barraseal®

Mineral waterproofing slurry for basements, reservoirs and wastewater areas
PCI Barraseal®
Dealer Search
features and benefits
fields of application
  • Water impermeable and frost resistant, multi-purpose use indoors and out up to a head of water of 10 meters.
  • Creamy consistency, easy to apply.
  • Can be applied by brush, trowel and spray gun.
  • Reliable adhesion, no primer or bonding slurry required.
  • Sulphate resistant against driving attacks in sewage areas.
  • High resistance to permanent and mechanical loads.
  • Excellent wet abrasion resistance, tested like non-vitrified pipes over 100,000 cycles.
  • Permanent resistance against heavy chemical attack of exposition class XWW3 to DIN 19573 (tested at ph 4.0).
  • For use in accordance with EN 206-1 with exposition classes XS 1-3, XF 1-3, XA 1-3.
  • Official test certificate in accordance with test principles for mineral waterproofing slurries.
  • Certified to EN 1504 part 2.

colour: grey
packaging: 25-kg-bag
  • For indoor and outdoor use.
  • For wall, floor and overhead application.
  • For producing cement-based waterproofing layers in structural and civil engineering construction, in new and old buildings.
  • For waterproofing reservoirs to DIN 18535 up to a filling level of 10 meters.
  • As an intermediate waterproofing layer under bitumen thick coatings such as PCI Pecimor.
  • For waterproofing basements, moist rooms and retaining walls.
  • For protecting surfaces in accessible channels, open channels and sewage plants and other sewage structures.
  • For waterproofing brickwork exposed to salt and moisture in combination with the PCI Saniment products.
  • For waterproofing areas exposed / not exposed to water.
PCI Barraseal®
Mineral waterproofing slurry
for basements, reservoirs and wastewater areas
Technical Datasheet: 152
Area (m²):
Your Result:
Quantity Required approximately (kg):
25-kg-bag (pieces):
name Classification report EN 13501 (A1) rules and standards EN 13501 (A1) combined with product PCI Barraseal®