PCI Barraseal®

Mineral waterproofing slurry for basements, potable water and wastewater areas

Dealer Search

features and benefits

fields of application

Calculator

downloads

certificates

Water impermeable and frost resistant, multi-purpose use indoors and out up to a head of water of 10 m.
Creamy and workable, easy to apply.
Can be applied by brush, trowel and spray gun.
Reliable adhesion, no primer or bonding slurry required.
Sulphate resistant against driving attacks in sewage areas.
High resistance to permanent and mechanical loads.
Excellent wet abrasion resistance, tested like non-vitrified pipes over 100,000 cycles.
Permanent resistance against heavy chemical attack of exposition class XWW3 to DIN 19573 (tested at ph 4.0).
For use in accordance with EN 206-1 with exposition classes XS 1-3, XF 1-3, XA 1-3.
With official test certificate for potable water areas in accordance with DVGW worksheet W 347/W 270.
Official test certificate in accordance with the MDS test principles.
Certified to EN 1504 part 2.

colour: grey

packaging: 25-kg-bag

For indoor and outdoor use.
For wall, floor and overhead application.
For producing cement-based waterproofing layers in structural and civil engineering construction, in new and old buildings.
For waterproofing reservoirs, e.g. potable water reservoirs to DIN 18535 up to a filling level of 10 m.
As an intermediate waterproofing layer under bitumen thick coatings such as PCI Pecimor.
For waterproofing basements, moist rooms and retaining walls.
For protecting surfaces in accessible channels, open channels and sewage plants and other sewage structures.
For waterproofing brickwork exposed to salt and moisture in combination with the PCI Saniment products.
For waterproofing areas exposed / not exposed to water.

Technical data sheet Safety data sheet Declaration of performance EN 1504-2

name Classification report EN 13501 (A1) rules and standards EN 13501 (A1) combined with product PCI Barraseal®